A fence not only increases the value of your property but also adds an extra level of security and privacy for your family. If you decide to put up a fence on your own, be prepared to avoid some common errors. You’ll want to prevent these issues by selecting a fence suitable for your home and your expertise. Read on to learn more about the common mistakes in Fencing in Newtown, CT, that you should avoid.
Not Checking Your Local Zoning Laws
When deciding whether or not to install a fence on your property, you should consider local regulations and applicable laws (which may affect the fence’s permitted materials, height, width, and color). Before beginning construction, you should get your fence inspected and approved by the local zoning office in Newtown, CT, or your homeowners’ association. You should also have a surveyor check your property borders to ensure you know exactly where they are.
If you continue fencing in Newtown, CT, without permission or in the wrong spot, you may have to take down the fence and pay penalties and legal fees.
Forgetting to Call the Utility Company
Before you start digging, be sure to contact your local utility company. In order to properly support a fence, it is recommended to bury the bottom third of the post. If you dig a hole for a fence post without first contacting the utility provider, you could hit a pipe or an underground wire, causing severe damage or even death.
Poorly Anchored Fence Posts
You’ll need to insert sturdy posts firmly and deeply to support the weight of your fence’s panels and rails. It should be at least two feet into the ground and reinforced with concrete or gravel. If fence posts aren’t sufficiently strong or set into the ground deeply enough, the fence could collapse. It’s essential to wait until the posts have fully settled before hanging the fence rails or panels to avoid any sagging.
Neglecting Slopes
Even a slight slope, which is common in most yards, can significantly affect how your fence is installed and how it looks in the end. If there are spaces at the bottom of your fence, not only will it appear odd, but little children or dogs might easily squeeze through and escape.
Incorrect Gate Positioning
When selecting where to put a gate, consider foot traffic patterns. This section of your fencing in Newtown, CT, will endure the most wear and tear, so it’s important to get the right quality and size of materials. Finally, make sure the surface beneath the gate is flat and that the gate itself is elevated enough to facilitate passage.
Using Poor Quality Materials
To get the best results from your fencing in Newtown, CT, consider your options and buy high-quality materials. If you want a fence that will last, you shouldn’t use old or discarded materials and especially avoid using scraps.
Whether you want to install your fence yourself or are in the market for a professional, your first step should be a consultation with Newtown Fence Contractor. In addition to providing you with the knowledge you need to complete your project — or a referral to a reliable contractor — they also have a wide selection of high-quality fencing materials.
Newtown Fence Contractor
21 Old Farm Rd, Newtown, CT 06470
Phone Number: +14753255080